What are the average costs for a roofer?

Indicative prices per m² or per project, including VAT and labor.

1. Renewing roofing (sloping roof)

2. Roof covering renew (flat roof)

3. Roof insulation (optional)

4. Roof repairs and maintenance

5. Scaffolding and crane costs (if necessary)

In summary: Examples of calculations per project size

Important considerations

• Prices may vary regionally due to labor costs, material delivery and local demand.
• For combined work (e.g. tiles + insulation + plumbing) labor costs can be used more efficiently.
• Roof replacement and insulation are often eligible for ISDE subsidy if the correct Rc value is achieved.

Quotes via jeofferte.nl

Via jeofferte.nl you will receive non-binding, specified quotes for:

• Flat or pitched roofs
• Replacement, repair, insulation or maintenance
• Projects with or without a permit process

You benefit from market-conform rates, advice from recognized roofers, and direct comparison of quality, material and price.

Including VAT, labor and standard material. Excluding scaffolding rental, crane costs or complex finishing.

1. Roofing – Pitched roof

2. Roofing – Flat roof

3. Reed Roof

4. Roof insulation (additional cost on top of roof replacement)

5. Roof maintenance (periodic)

In summary: Indicative price range

Quotes via jeofferte.nl

Via jeofferte.nl you can receive non-binding quotes based on:

• Your roof type and material choice
• M² surface area, accessibility and finish
• Optional insulation, maintenance or roof details

The quotes are prepared by recognized roofers with clear price breakdown and advice on sustainability and any subsidy options (such as ISDE).

1. Pitched roof – replacing roof tiles

2. Flat roof – roof covering replacement

3. Thatched roof – new or replacement

4. Roof repair and maintenance

Important Notes

• The price examples are based on easily accessible roofs without extreme slope.
• Prices may vary based on material selection, details (dormers, chimneys) and location.
• Access (scaffolding, crane) and any permits are not standardly included.
• For renovation projects, combinations with insulation are often more efficient and eligible for subsidies.

Quotes via jeofferte.nl

Via jeofferte.nl you can request quotes without obligation based on your project:

• Clear price structure per m² or per component
• Optional: insulation, gutters, lead-throughs and finishing
• Applicable to private homes, commercial buildings and monuments

Jeofferte.nl compares recognized roofers and selects providers based on quality, reliability and total price.

Important considerations

• Prices are based on standard accessible roofs without exceptional circumstances.
• Costs for scaffolding, crane or permit are not included, unless specifically stated.
• Roof insulation is optional and is calculated as a separate item, except for sarking or closed reed constructions.
• Combination projects (e.g. tiles + insulation + lead work) are more efficient and cheaper per unit than staggered execution.

Quotes via jeofferte.nl

Via jeofferte.nl you can request multiple quotes without obligation based on your specific project type:

• Clear price breakdown per component
• Choice between multiple roof coverings or constructions
• Advice on execution, lifespan and possible subsidy

Jeofferte.nl works exclusively with recognized roofers who comply with the applicable implementation guidelines and warranty conditions.

Including VAT, labor, standard materials and installation.

1. Pitched roofs – Roof tiles and slates

2. Flat roofs – Bitumen, EPDM, PVC, Green roof

3. Reed roofs

4. Solar Tiles (PV roof tiles)

The price per m² of solar tiles is strongly dependent on brand, yield class and required connection technology.

Important considerations

• Lifespan depends on location, maintenance and quality of execution.
• Prices are based on normally accessible roofs, without scaffolding rental or exceptional circumstances.
• With roof replacement, battens, foil, leadwork and roof edges are often renewed – these are included in the price unless otherwise stated.
• When renovating, combine with roof insulation where possible to benefit from savings and subsidies (ISDE, at Rc ≥ 3.5).

Request quotes via jeofferte.nl

Via jeofferte.nl you can receive multiple non-binding quotes from recognized roofers for all types of roofing:

• Pitched or flat roofs
• With or without insulation
• Comparison of price, material and warranty conditions

Also possible: an advisory report or comparison table with lifespan, maintenance costs and subsidy potential per roof type.

Why roof insulation?

• Up to 30% heat loss occurs through a poorly insulated roof.
• Insulation reduces energy consumption, increases living comfort and makes the home future-proof.
• With insulation with an Rc value ≥ 3.5 you are eligible for ISDE subsidy.

Types of Roof Insulation

1. Interior insulation (between or under the roof boarding)

2. Exterior insulation (sarking roof, pitched)

Sarking insulation is the best method for a sustainable roof renovation and is often combined with a subsidy application.

3. Flat roof insulation (top side)

Subsidy (ISDE 2025)

When using insulation with an Rc ≥ 3.5 m²K/W, you are eligible for the Investment Subsidy Sustainable Energy (ISDE):

The subsidy only applies when carried out by a recognized contractor. Application must be submitted within 24 months of execution via rvo.nl.

Price Examples Roof Insulation

Request quotes via jeofferte.nl

Via jeofferte.nl you can request quotes for:

• Roof insulation (inside or outside)
• Combined packages with roofing
• Preparation of subsidy application (ISDE)

You will receive clear price quotations with material selection, Rc values, subsidy options and implementation advice.

1. Combine insulation with roof replacement

Have insulation on the outside (sarking) carried out directly when you have the roofing replaced anyway. This is how you save:

• Up to 30% on labor costs (scaffolding and finishing once)
• Time and money in the long term by preventing double work
• Possibility of a higher Rc value without loss of space

This combined approach is more efficient and qualifies for the higher ISDE subsidy.

2. Request multiple quotes via jeofferte.nl

Compare at least 3 quotes from recognized roofers via jeofferte.nl:

• Price differences can be up to 20–30% for the exact same work
• You get insight into the price structure (material, labor, extra options)
• You avoid excessive margins or oversizing

3. Choose an Rc value ≥ 3.5 for subsidy

With an insulation value of at least Rc 3.5 m²K/W you are eligible for ISDE subsidy:

• Only recognized contractors are accepted
• Higher subsidy when combined with a 2nd measure (e.g. glass, heat pump)
• The subsidy can be up to € 30 per m², which can cover up to 50% of the insulation costs

4. Avoid unnecessary interior finishing

Choose external roof insulation (sarking) if you don't want to refinish the inside:

• No plasterboard, painting or redesign required
• Lower chance of failure in case of condensation or moisture problems
• You retain interior space and save on finishing

5. Combine multiple measures for more benefit

Combine roof insulation with other sustainable measures within 24 months, such as:

• HR++ or triple glazing
• Facade or floor insulation
• Solar panels or solar water heater
• Heat pump

By combining 2 measures, you double the ISDE subsidy per m² on insulation.

6. Perform small tasks yourself (if allowed)

For some forms of internal insulation, you can perform preparatory work yourself:

• Emptying the attic
• Dismantling old trim
• Applying simple vapor barrier film

Note: for subsidy, the insulation material must always be installed professionally.

7. Choose the right moment: pre- or post-season

Roofers often have lower occupancy rates in the spring (March–May) and the autumn (September–November). This can lead to:

• Faster execution
• Better negotiating position
• Sometimes extra promotional discount on insulation projects

8. Collect quotes with clear m² prices and Rc values

Make sure you see the following in every quote:

• What the m² rate is for insulation and roofing
• Which materials are used (e.g. PIR, mineral wool)
• Which Rc value is guaranteed (check for 3.5 or higher)

This prevents discussions afterwards and makes applying for subsidies easier.

More insight via jeofferte.nl

You can use jeofferte.nl free of charge to:

• Compare multiple roofers on price and insulation performance
• Get help with subsidy application (ISDE)
• Receive scenarios with and without insulation, including payback period