What does it cost to install electricity?

Laying or expanding electrical installations is a specialist job that must always be carried out by a certified electrician. The costs depend on the scope of the work, the number of connection points and the complexity of the installation.

Average costs per component

New group in the meter cupboard

• Costs per new group: approx. 100 to 150 euros
• Including circuit breaker and connection in the group box

Extra residual current device

• Costs: approx. 80 to 100 euros
• Needed when more groups need to be distributed or specific security is required

Residual current circuit breaker

• Combination of circuit breaker and residual current device
• Costs: approx. 160 to 200 euros each

Sockets and light points

• Socket (built-in): 75 to 120 euros per point
• Light point: 60 to 100 euros per point
• Depending on accessibility and finish

Pulling cables

• For renovation or new construction: average 20 to 40 euros per linear meter of pipe and cable

Complete electrical installation

• For a complete home installation:
• Apartment (2-3 rooms): approx. 3,500 – 5,000 euros
• Detached house: approx. 5,000 – 8,500 euros
• Larger house or villa: 8,500 euros and higher

Factors that influence the price

1. Type of building and scope
• New construction is easier because pipes can be concealed directly.
• Renovation takes more time due to hacking and demolition work.
2. Number of connection points
• The more sockets, switches and light points, the higher the price.
3. Complexity
• Special connections such as high-voltage power, charging station or solar panels increase the costs.
4. Quality and type of materials
• Brands and quality of switching material and group box have influence on the total price.
5. Labor costs
• The hourly rate of an electrician is on average between 55 and 75 euros.
6. Region and accessibility
• Work in urban areas is often more expensive than in rural areas.

Example Calculation (small extension)

• New group for kitchen: 120 euro
• Extra residual current device: 90 euro
• Two sockets: 2 × 90 euro = 180 euro
  Total: approximately 390 euro

Example Calculation (complete home installation)

• 8 groups: 8 × 125 euro = 1,000 euro
• 2 residual current devices: 2 × 90 euro = 180 euro
• 40 connection points (sockets and light points): 40 × 80 euro = 3,200 euro
• Wiring and finishing: approx. 1,200 euro
  Total: approx. 5,500 – 6,000 euro

Importance of a recognized electrician

• Working on electrical installations is specialist work and subject to strict safety standards (NEN 1010).
• A recognized electrician guarantees a safe installation and correct connection.
• Comparing quotes, for example via jeofferte.nl, provides insight into price and quality.

Conclusion
The costs for installing electricity in 2025 vary greatly depending on the scope of the work. Small extensions cost a few hundred euros, while a complete installation in a home can amount to more than 8,000 euros. By making a clear plan in advance and comparing quotes, costs can be optimized.

The price for electrical work depends on the type of job. Various scenarios are described below with an indication of the costs.

1. Expansion with one group and several sockets

Situation:
In an existing house, an extra group is installed for the kitchen and three new sockets are placed.

Work and costs:

• New group in meter cupboard: 125 euros
• Extra residual current circuit breaker: 90 euros
• 3 sockets (built-in, including piping): 3 × 90 euros = 270 euros
• Working hours and small material: 100 euros

Total: circa 585 euro

2. Small renovation (extra light points and sockets)

Situation:
In a living room and bedroom, extra connection points are added.

Work and costs:

• 5 new sockets: 5 × 90 euros = 450 euros
• 3 new light points: 3 × 80 euros = 240 euros
• Pulling cables: 20 meters × 25 euros = 500 euros

Total: approximately 1,190 euros

3. Complete new installation in apartment

Situation:
Complete electrical installation in an apartment of approximately 70 m² (new construction or complete renovation).

Work and costs:

• 6 groups in the meter cupboard: 6 × 125 euros = 750 euros
• 2 residual current devices: 2 × 90 euros = 180 euros
• 25 connection points (sockets and light points): 25 × 80 euros = 2,000 euros
• Wiring and installation (pipes, tubes, assembly): 1,200 euros

Total: approximately 4,100 – 4,500 euros

4. Complete installation in a single-family home

Situation:
Complete installation in a house of approximately 120 m².

Work and costs:

• 8 groups: 8 × 125 euro = 1,000 euro
• 2 residual current devices: 2 × 90 euro = 180 euro
• 40 connection points: 40 × 80 euro = 3,200 euro
• Wiring and installation: 1,500 euro

Total: circa 5,800 – 6,000 euro

5. Luxury installation in villa or large house

Situation:
Extensive installation in a large house (200 m²), including three-phase power and special facilities.

Work and costs:

• 12 groups and power current: 12 × 125 euro = 1,500 euro
• 4 residual current devices: 4 × 90 euro = 360 euro
• 70 connection points: 70 × 85 euro = 5,950 euro
• Special provisions (charging station, home automation): 3,000 euro
• Wiring and installation: 2,500 euro

Total: approximately 13,000 – 14,000 euro

Factors that influence these prices

• Number of groups and points
• Type of property (new construction or existing building)
• Complexity of the installation
• Extra facilities such as power current, home automation or solar panels
• Regional rates and accessibility

Conclusion

Depending on the scope of the work, the costs can vary from a few hundred euros (small expansion) to more than 10,000 euros (complete installation in a large house). It is wise to request quotes from several certified electricians. Platforms like jeofferte.nl simplify this process and provide a transparent cost overview.

In addition to the standard installation of groups, sockets and light points, additional options can be chosen to expand or modernize the installation. Below is an overview of common extra options with their average costs.

1. Three-phase power (3-phase connection)

• Costs: approximately 250 to 450 euros for adjusting the meter cupboard.
• Application: for heavy equipment such as electric hobs, saunas or large machines.
• Sometimes adjustment by the grid operator is necessary; those costs are added on top.

2. Charging station for electric car

• Installation costs: 800 to 1,500 euros, depending on the type of charging point and the distance to the meter cupboard.
• Extra: new group and often a separate residual current circuit breaker or residual current circuit breaker.

3. Solar panel connection

• Adjusting the distribution board: 250 to 400 euros (extra group, often with separate security).
• Alignment with inverter: depending on power, a separate 3-phase group may be required.

4. Home automation and smart systems

• Cost per module: 75 to 200 euros per part (smart switches, sensors).
• Integration costs: depending on the size; full integration can amount to several thousand euros.

5. Surge protection

• Costs: 100 to 250 euros.
• Application: protects the installation and equipment against voltage peaks, for example due to lightning strikes.

6. Outdoor sockets and garden lighting

• Outdoor socket: 100 to 150 euros per point (including splash-proof version).
• Underground cable to shed or garden: approximately 25 to 40 euros per meter of cable, excluding connection point.

7. Induction cooking group or separate cooking group

• Costs: 150 to 250 euros for a separate cooking group in the meter cupboard.
• Extra: special cable to the stove or hob.

8. Heat pump or air conditioning connection

• Costs: 150 to 400 euros for an extra group and matching security.
• Depending on power, a separate 3-phase connection may be required .

Factors that influence the price of extra options

1. Distance from the meter cupboard to the location of the connection.
2. Any hacking and demolition work in existing walls or floors.
3. Combining multiple jobs at once.
4. Complexity of the installation and the required components.

Combining pays off

By having extra options performed during a major renovation or installation:

• Save on call-out charges and labor hours.
• The meter cupboard is future-proofed in one go.

Conclusion
Extra options for an electrical installation can vary from a few hundred euros (for example, for a cooking group or surge protection) to several thousand euros (for example, for a charging station or home automation). The combining work and planning it in time can save costs. Compare multiple quotes via, for example, jeofferte.nl to get the best price-quality ratio.

The price for installing or expanding an electrical installation depends on several factors. These factors determine the required materials, labor hours and complexity of the work.

1. Scope of the installation

• Number of connection points
  The more sockets, light points and switches that need to be installed, the higher the costs.
• Number of groups in the meter cupboard
  More groups means extra circuit breakers and possibly extra earth leakage circuit breakers.

2. New construction versus existing construction

• New construction
  Pipes and cabling can be installed directly during construction, which is more efficient and cheaper.
• Existing construction
  Often requires hacking and demolition work to conceal cables. This costs more time and increases labor costs.

3. Complexity of the installation

• Special connections such as high-voltage power, charging stations, solar panels, home automation or heat pumps require extra work and materials.
• The more special provisions, the higher the costs.

4. Distance and accessibility

• If the location of the new connection points is far from the meter cupboard, more cable must be pulled.
• Difficult accessibility (for example, due to thick walls, ceilings or crawl spaces) increases the working time.

5. Material selection

• Cheaper materials are lower priced, but have a shorter lifespan.
• A-brands such as ABB, Hager and Eaton are more durable and reliable, but slightly more expensive.

6. Extra security and options

• Additional residual current devices, residual current circuit breakers or surge protection increase the price.
• Specific components are required for home automation and smart systems, which incur additional costs.

7. Labor costs and region

• The hourly rate of electricians is on average between 55 and 75 euros.
• In urban areas, rates are often higher than in rural areas.

8. Planning and combinations

• Work that is scheduled during regular working hours is cheaper than emergency jobs.
• By having multiple jobs done at the same time, travel costs and double labor hours are avoided.

Conclusion
The costs for installing electricity are mainly determined by the scope and complexity of the installation, the situation (new construction or existing building), the chosen materials and the number of extra facilities. Combining work and comparing quotes – for example via jeofferte.nl – helps to optimize costs.

Installing or expanding electricity can be a major investment. With good preparation and smart choices, significant savings are possible without compromising safety or quality.

1. Combine work

• Have multiple jobs done at once, such as:
• Extra groups in the meter cupboard
• Installation of new sockets and light points
• Placement of a residual current device or residual current circuit breaker
• This saves call-out charges and reduces the number of working hours.

2. Plan well in advance

• Avoid rush jobs.
  Emergency work and evening/weekend work have a higher hourly rate.
• By planning in time, the electrician can schedule the work efficiently.

3. Choose future-oriented

• Think ahead when renovating or building new:
• Provide extra pipes or connection points in advance
• Place sufficient groups in the meter cupboard for future appliances such as charging stations, heat pumps or solar panels
• This prevents expensive expansions afterwards.

4. Compare quotes

• Request multiple quotes from certified electricians.
  There can be significant price differences between providers.
• Via platforms such as jeofferte.nl you can easily compare specialists on price, experience and quality.

5. Use quality in the right places

• Cheap materials can save money in the short term, but increase the risk of malfunctions and maintenance.
• By choosing A-brands for important components (group box, residual current devices, circuit breakers), you avoid costs in the long term.

6. Limit hacking and demolition work

• In existing buildings: where possible, opt for existing pipes or empty pipes.
• Alternatives such as cable trays or installation during other renovations may be cheaper.

7. Consider energy-efficient solutions

• Install energy-efficient lighting (LED) directly.
• Consider smart switches and home automation to limit energy consumption.
• In the long term, this can reduce energy costs and recoup the investment.

8. Maintenance and testing

• Have the electrical installation checked periodically.
  Replacing defective components in time prevents major damage and costs.
• Test the residual current device yourself twice a year.

Conclusion
By planning smartly, combining activities, comparing multiple quotes and investing in a future-oriented way, you can save considerably on the costs of installing or expanding electricity. Platforms such as jeofferte.nl can help with choosing the right professional.