What does an electrician cost and what should you look out for?

The costs for an electrician are usually calculated based on an hourly rate. This rate varies depending on experience, type of work and the region.

Average hourly rates in 2025

• Starting independent electrician (ZZP):
  35 to 45 euros per hour
• Experienced independent electrician:
  50 to 55 euros per hour
• Electrician via certified installation company:
  55 to 75 euros per hour
• Specialist work (for example, industrial installations, home automation or charging stations):
  70 to 90 euros per hour
• Emergency jobs (evening, weekend or holidays):
  90 to 120 euros per hour or more, depending on the urgency and location

What determines the hourly rate?

1. Experience and certification
   Experienced and certified electricians charge higher rates, but also provide more security and guarantee.
2. Complexity of the job
   Specialist installations such as high-voltage power, solar panels, charging stations or home automation require more knowledge and therefore a higher rate.
3. Region
   In urban areas such as the Randstad, rates are usually higher than in rural areas.
4. Urgency and working hours
   Work outside normal working hours is often carried out with a surcharge of 25 to 50 percent.
5. Type of assignment
   Small repairs are often calculated on an hourly basis. For larger projects electricians sometimes work with a fixed price.

Extra costs in addition to the hourly rate

In addition to the hourly rate, there may be additional costs:

• Call-out charges: often 20 to 50 euros, depending on the distance.
• Material costs: for example for cables, sockets and switches.
• Disposal of waste or old materials: may be charged separately.

Conclusion

The hourly rate of an electrician in 2025 varies on average between 35 and 75 euros for standard work, and can be up to 90 euros or more for specialist work. Emergency jobs outside office hours are significantly more expensive. By having a clear quote drawn up in advance, for example via a platform such as jeofferte.nl, an accurate price agreement can be made.

The total cost of an electrician's job depends on the type of project, the scope of the work and the complexity. Below are the most common jobs with indicative costs in 2025.

1. Small jobs (repairs and additions)

• Add socket or light point: 75 – 120 euros per point
• Replace or install switch: 70 – 100 euros per point
• Connect lamp or fixture: 75 – 150 euros, depending on accessibility
• Solve minor fault: 100 – 200 euros, depending on diagnosis and time

2. Group box and security

• Install new group in the meter cupboard: 100 – 150 euros per group
• Extra residual current device: 80 – 100 euros
• Residual current circuit breaker (combination of protections): 160 – 200 euros per piece
• Replace complete group box: 500 – 900 euros, depending on number of groups and type of cabinet

3. Larger extensions

• Extra connections for the kitchen (e.g. cooking unit): 150 – 250 euro
• Preparation and connection for solar panels: 250 – 400 euro
• Connecting charging station for electric car: 800 – 1,500 euro, depending on type and distance

4. Complete installation

• Apartment (approx. 70 m²): 4,000 – 5,000 euro
• Detached house (approx. 120 m²): 5,500 – 7,500 euro
• Large house/villa: 8,500 – 14,000 euro or more, depending on luxury and extra amenities (home automation, high voltage, heat pump)

5. Specialist work

• Home automation and smart systems: from 75 euros per module
• Install surge protection: 100 – 250 euros
• Industrial or heavy current installations: custom-made, often 70 – 90 euros per hour plus materials

Factors that influence project costs

1. Scope of work – more points, more time and more materials.
2. New construction or existing building – hacking and demolition work increases costs.
3. Type and quality of materials – A-brands are more expensive but last longer.
4. Specialist facilities – charging stations, solar panels and home automation require extra work.
5. Region and planning – in urban areas and for urgent requests, the costs are higher.

Conclusion
In 2025, the costs for electrician projects vary greatly: small jobs often cost a few hundred euros, a new distribution board a few hundred euros, and complete installations a few thousand euros. Comparing quotes, for example via jeofferte.nl, provides a good overview of the possibilities and costs for a specific project.

The price of work carried out by an electrician is not only determined by the hourly rate, but also by circumstances and choices that directly affect the total cost.

1. Scope and type of work

• Small jobs such as installing an extra socket or lamp are relatively inexpensive.
• Larger projects such as renovating a fuse box or installing a complete system cost considerably more time and materials.

2. Complexity of the installation

• Special facilities such as three-phase power, charging stations, solar panels or home automation are more complex and require specialist knowledge.
• The more technical and extensive the installation, the higher the working hours and the rate.

3. New construction or existing buildings

• New construction: pipes and cables can be easily installed as the walls and floors are still open.
• Existing buildings: there is often hacking and breaking work required, which takes more time.

4. Accessibility and distance

• If the meter cupboard or connection points are difficult to reach (e.g., crawl spaces, thick walls, or floors), this will take extra time.
• The distance of the electrician to the location determines the amount of the travel costs.

5. Material Choice

• Top brands such as ABB, Hager, or Eaton are more expensive to purchase, but last longer and are more reliable.
• Cheaper materials may seem advantageous in the short term, but often incur maintenance costs.

6. Hourly rate and experience of the electrician

• Starting freelancers charge lower rates (approximately 35 to 45 euros per hour).
• Experienced or certified electricians charge more (approximately 55 to 75 euros per hour).
• Specialist work can cost up to 90 euros per hour.

7. Timing of Work

• Work outside of regular working hours (evening, weekend, or emergency) will incur higher rates.
• Planning work in a timely manner can prevent these additional costs.

8. Extra options and extensions

• Additional residual current devices, surge protection, home automation or special connections increase the price.
• It is often more economical to have multiple jobs done at once.

Conclusion
The costs for work by an electrician depend on the scope of the job, complexity, construction situation, accessibility, material choice, experience of the electrician, the time of execution, and any extra options. Clearly describing the work in advance and comparing multiple quotes – for example, via jeofferte.nl – helps to control costs effectively.

Milling in walls is a commonly used method to neatly conceal cables and pipes in existing buildings. The costs depend on the number of meters, the hardness of the wall, and the accessibility of the workplace.

Average costs per linear meter

• Price per meter of slot milling: approximately 10 to 20 euros per linear meter
  (milling only, excluding laying pipes and closing)

Full costs including pipe and sealing

When the electrician not only mills, but also lays the pipe and seals the slot:

• Price per meter: 25 to 40 euros per linear meter
• This includes:
• Milling the slot
• Laying an electrical conduit with cable
• Sealing the slot with mortar or plaster

Influential factors on costs

1. Type of wall
• Gypsum blocks or sand-lime brick are easier and cheaper to mill.
• Concrete walls or hard bricks take more time and special tools.
2. Number of meters
• With a larger number of meters, the price per meter is often slightly lower.
3. Accessibility
• Difficult workplaces or working at height require more time.
4. Combining work
• When milling is combined with other work (for example, new sockets or light points), the total costs are lower.

Example Calculation

For 10 meters of slots in a concrete wall, including pipes and sealing:

• 10 meters × 35 euros = 350 euros

For softer walls, this can be 10 meters × 25 euros = 250 euros.

Savings Tip

• By clearly indicating in advance where the pipes and sockets should be placed and by having multiple jobs done at once, you save on labor hours and call-out charges.
• Comparing quotes via, for example, jeofferte.nl can help to find the best price and quality.

Conclusion
The costs for milling in walls in 2025 are on average between 10 and 20 euros per meter for milling only, and between 25 and 40 euros per meter for milling including piping and sealing. For larger projects and soft walls, the prices per meter are lower, for hard walls and small jobs higher.

1. Combine work

Have multiple jobs done at once:

• New sockets, switches and light points
• Adding groups in the meter cupboard
• Placement of a residual current device or residual current circuit breaker
  By having everything done in one appointment, travel costs and working hours are limited.

2. Request multiple quotes

There can be significant price differences between electricians.
Requesting quotes from multiple recognized companies gives a good picture of rates and conditions. Platforms such as jeofferte.nl are suitable for this.

3. Plan on time

• Avoid rush jobs and jobs in the evening or weekend, because these are more expensive.
• Plan work well in advance so that the work can be carried out at a normal rate.

4. Preparing the workplace

• Make the workplace clear and accessible.
• Make sure it is clear where connection points should be.
  This saves time and therefore labor costs.

5. Future-oriented working

• When renovating, have extra pipes or empty pipes installed for future expansions such as solar panels or charging stations.
• Re-opening walls and floors later costs much more.

6. Combine disciplines

In the case of a major renovation, the planning of electrician, plumber and contractor can be coordinated.
This allows work such as milling or chopping to be carried out in one go.

7. Choose quality in the right places

Cheap materials can save money in the short term, but often lead to higher costs in the event of malfunctions.
Using solid components for the distribution board, residual current devices and wiring prevents problems in the long term.

8. Test and maintain

• Test the residual current device yourself twice a year using the test button.
• Regular maintenance and inspection prevents major malfunctions and expensive repairs.

9. Bundle small jobs

If you only want to have one socket installed, this can be relatively expensive. Collect small wishes and have them carried out all at once.

Conclusion
By planning smartly, comparing quotes, preparing the workplace well and thinking ahead, you can significantly reduce the costs of an electrician. Combining multiple jobs into one project provides the greatest savings.

1. Safety comes first

• Electricity always involves risks.
• Only a certified electrician is allowed to carry out work on the meter cupboard and main installation.
• Incorrect connection can lead to fire hazard or electrocution.

2. NEN standards and legal obligations

• The installation must comply with the Dutch NEN 1010 and NEN 3140 standards.
• In the case of new construction or renovation, residual current devices and a well-distributed group box are mandatory.
• Without compliance with these standards, disputes may arise with the insurance company in the event of damage.

3. Quotes and transparency

• Always request multiple quotes so that you gain insight into the price and content of the work.
• Check whether material, labor and call-out charges are listed separately.

4. Future-proof installation

• During renovations and new construction, it is wise to already take into account future appliances, such as solar panels, heat pumps or charging stations.
• Extra empty conduits or space in the meter cupboard save costs in the future.

5. Quality of materials

• Use good materials (for example, A-brands for switching material, wiring and distribution boxes).
• Cheap materials may seem advantageous in the short term, but more often lead to malfunctions.

6. Testing and inspection

• Have the installation tested and checked after completion.
• Check the residual current device twice a year with the test button.

7. Documentation

• Ask for an overview of the work performed and a diagram of the distribution board.
• This makes future maintenance easier and prevents errors.

8. Choose recognized professionals

• Recognized electricians work according to the correct standards and often provide warranty on their work.
• Via a platform such as jeofferte.nl you can easily compare multiple recognized companies.

Conclusion
Safety, compliance with standards and transparency are the most important aspects in electrical work. By making clear agreements in advance, planning for the future and hiring a recognized electrician, risks and unexpected costs are minimized.