What are the average costs for grouting?

1. Surface area and scope of the project

The larger the total facade area:

• The higher the total costs
• But often a lower price per m² due to economies of scale

Example:
A small facade of 20 m² can have a price of 40 euros per m², while the same work can drop to 33 euros per m² at 200 m².

2. Type of jointing

The type of joint determines the price per m²:

• Local repair: 7 – 11 euros per m²
• Full jointing (complete renewal): 30 – 40 euros per m²
• Recessed joints: 35 – 45 euros per m²
• Cut or knife joints (traditional): 60 – 100 euros per m²

Craftsmanship jointing is more labor-intensive and requires more precision, which increases the price.

3. Preparation: removing old joints

When completely renewing the jointing, all the old jointing must first be removed:

• Grinding or chiseling: labor-intensive and time-consuming
• The harder and older the joints, the more time this costs

4. Condition of the facade

A facade in poor condition requires extra work:

• Replacing loose stones
• Repairing cracks
• Cleaning before jointing
  These additional activities increase the total costs.

5. Accessibility and height

• Easily accessible facades: Fewer costs because no extra facilities are needed.
• Difficult to access facades: Extra costs for scaffolding, aerial platforms or fall protection.
• Labor costs are considerably higher for tall buildings.

6. Combination with other work

Combining jointing with other work such as cleaning or impregnation can lower the price per m²:

• Only build scaffolding once
• Fewer working hours due to more efficient planning

Example:
Renewing and impregnating joints together often costs less than having both jobs done separately.

7. Type of Mortar and Finish

• Standard joint mortar: cheaper
• Special mortar or colored mortar: more expensive
• Specific finish (smooth, brushed or decorative): more work and higher costs

8. Region and experience of the contractor

• Hourly rates are higher in urban areas.
• Specialized professionals with a lot of experience often charge a slightly higher rate, but deliver more sustainable work with a guarantee.

9. Season and planning

• In busy periods (spring and autumn) prices are often higher due to full schedules.
• Discounts or more favorable rates are possible outside the peak season.

Conclusion

The price for joint work is influenced by:

1. Surface area and accessibility
2. Type of joint and finish
3. Condition of the facade and necessary preparations
4. Combination with other work
5. Quality of materials and experience of the professional

On average, prices for completely renewing joints range between 30 and 100 euros per m², depending on the chosen design, while small repairs start from around 7 euros per m².

Requesting and comparing multiple quotes via a platform such as jeofferte.nl provides a clear picture of the total costs and the best approach.

1. Repairing local jointing

• Guideline price: 7 – 11 euro per m²
• What is done: Only loose or damaged joints are removed and replaced.
• When to choose: Suitable for small surfaces with limited damage.

2. Complete grinding and re-jointing (standard)

With this method, all joints are removed and re-applied.

Flush joints

• Price: 30 – 40 euro per m²
• Characteristic: The joint is applied flat and connects seamlessly to the brickwork. This is the most commonly used form.

Recessed joints

• Price: 35 – 45 euro per m²
• Characteristic: The joint is slightly recessed in the wall, which creates a shadow effect.

3. Traditional jointing

Tuckpointing or flush pointing

• Price: 60 – 100 euro per m²
• Characteristic: Luxurious finish with sharp edges. Very labor-intensive and mainly used for monumental or classic buildings.

4. Additional work that affects the price per m²

• Removing old joints: For complete renewal, this must always be done. This is labor intensive.
• Cleaning in advance: Sometimes the facade must first be cleaned for good adhesion.
• Repair work: Repairing cracks or replacing loose stones results in a higher total price.

Example calculations

Example 1 – Terraced house (60 m², flat joints):
60 × 35 euros = 2,100 euros

Example 2 – Corner house (100 m², complete grinding and jointing, recessed):
100 × 40 euros = 4,000 euros

Example 3 – Monumental house (120 m², flush joints):
120 × 80 euros = 9,600 euros

Important Price Factors

1. Surface area and accessibility of the facade
2. Type of jointing and desired finish
3. Possible combination with cleaning and impregnation
4. Quality of the bricks and condition of the existing jointing
5. Experience and specialization of the chosen company

Conclusion

The costs for jointing in 2025 vary:

• Small repair: from 7 euros per m²
• Complete renewal: 30 – 45 euros per m²
• Craft work: 60 – 100 euros per m²

By combining activities and requesting multiple quotes (for example, via a platform such as jeofferte.nl), the price per m² can often be reduced and a more sustainable solution is realized.

1. Situation: Local repair of joints

Activities:

• Only loose or damaged joints are removed and reapplied.
• Suitable if less than 20 to 25% of the jointing is bad.

Price indication per m²: 7 – 11 euro

Calculation:
60 m² × 9 euro (average) = 540 euro

Note:
This option is only recommended for minor damage, so that the rest of the facade remains in good condition.

2. Situation: Complete grinding and re-pointing – Flat joint

Activities:

• Completely remove old joints
• Re-point the entire facade with flat joint technique

Price indication per m²: 30 – 40 euro

Calculation:
60 m² × 35 euro (average) = 2,100 euro

Note:
This is the most common option for facades with outdated or porous jointing.

3. Situation: Complete grinding and re-grouting – Recessed joints

Work:

• Same process as flush joints, but the joint is applied slightly recessed

Price indication per m²: 35 – 45 euro

Calculation:
60 m² × 40 euro (average) = 2,400 euro

Note:
This gives a slightly more luxurious look due to the shadow effect.

4. Situation: Traditional tuckpointing or flush pointing

Work:

• Remove old joints
• Apply new joints in traditional style (tuckpointing/flush pointing)
• Very labor-intensive, often used for monuments or luxury properties

Price indication per m²: 60 – 100 euro

Calculation:
60 m² × 80 euros (average) = 4,800 euros

Note:
The highest investment, but ensures a classic and high-quality finish.

Factors that can further increase these amounts

• Extra repair work: address cracks, loose stones or heavy soiling in advance
• Accessibility: use of scaffolding or aerial platforms
• Combination with cleaning and impregnation: this can increase the total price, but often cheaper per component make

Conclusion

For a facade of 60 m², the total costs in 2025 will be globally between:

• € 540 for small local repairs
• € 2,100 – 2,400 for complete renovation (flat or recessed)
• € 4,800 for traditional cut or carved joints

By having an inspection carried out in advance and requesting several quotes via a platform such as jeofferte.nl, you get a good idea of the costs and the right approach.

1. Always start with a thorough inspection

Have the facade professionally assessed before you place an order.

• Check the condition of the joints, stones and any cracks present.
• An inspection prevents additional costs later due to unexpected defects.

2. Choose the right method for each facade

Not every facade can be treated in the same way:

• Solid masonry: can often withstand high pressure or sandblasting.
• Fragile and monumental facades: require mist spraying or chemical cleaning.
• The wrong method can cause permanent damage.

3. Combine work for efficiency

By combining cleaning, jointing and impregnation in one project:

• You only pay once for scaffolding or aerial platforms.
• The work is carried out in one schedule.
• The total price per m² is often lower.

4. Prevent delayed maintenance

Minor defects such as loose joints or cracks should be addressed as soon as possible.

• Early repair prevents expensive renovations.
• Regular inspection (once every 3 to 5 years) extends the life of the facade.

5. Invest in impregnation

After cleaning and possibly re-pointing:

• Impregnation protects the facade against moisture and dirt.
• Ensures that pollution adheres less quickly.
• Reduces maintenance costs in the long term.

6. Pay attention to permits

• A permit is often required for monuments or protected buildings.
• Rules sometimes also apply to facade insulation or major changes to the facade.
• Check this with the municipality in good time.

7. Safety and accessibility

• Ensure the facade is easily accessible.
• Scaffolding or aerial platforms are unavoidable for facades that are difficult to access.
• Take into account extra costs for traffic control in busy streets.

8. Work with experienced specialists

• Choose a recognized facade company with demonstrable experience.
• Ask for references and guarantees.
• A reliable company works accurately and prevents damage to the facade.

9. Compare multiple quotes

• Request multiple quotes to gain insight into the costs and approach.
• Don't just look at price, but also at warranty, working method and quality.
• Platforms like jeofferte.nl can help to easily compare specialists.

10. Think long term

• Good maintenance and preventive measures cost money, but are cheaper than overdue maintenance.
• Choose sustainable solutions and materials that last longer.

Conclusion

Through good preparation, combining activities, choosing the right specialist and planning preventive maintenance can keep costs manageable and the facade remains technically and aesthetically in top condition. Regular checks and timely intervention are the most important success factors.