
Everything You Need to Know About Spraying Your Kitchen
Free and without obligation
Find your contractor
Free and without obligation
- What is kitchen spraying?
- Benefits of kitchen spraying
- Suitable kitchen parts for spray painting
- Preparing the kitchen for spray painting
- Colors and finishes when spraying kitchens
- Costs of kitchen spraying
- DIY vs. professional job
- Maintenance of a sprayed kitchen
- Common mistakes when spraying kitchens
- Inspiration and practical examples for spraying kitchens
What is kitchen spraying?
Kitchen spraying is a finishing technique where the fronts, cabinets, and other visible parts of a kitchen are given new layers of lacquer or paint using a spray gun. Instead of completely replacing the kitchen, the existing kitchen furniture gets a new look through a sleek and even sprayed finish. This is a popular alternative to a full kitchen renovation, as it is both cost-effective and sustainable.
Features
- Sleek finish: spray painting provides a smooth and streak-free result, without brush or roller marks.
- Versatile color options: virtually any RAL color and finish (matte, satin, high gloss) is possible.
- Durable: when using high-quality paints, the lifespan is comparable to factory spray painting.
- Adaptable: suitable for wooden, MDF and sometimes plastic kitchen fronts.
Applications
- Kitchen fronts: doors, drawers, and cabinet panels.
- Fixed parts: side panels, plinths, and frames.
- Additional elements: sometimes also worktops or tiles, provided they are technically suitable and well pre-treated.
Technical aspects
- Pre-treatment: dismantling of the fronts, cleaning, degreasing and sanding for optimal adhesion.
- Spraying method: mostly airless or HVLP (High Volume Low Pressure) spraying technique.
- Materials: water-based lacquers, 2-component lacquers (PU) or industrial coatings.
- Drying time: depending on the lacquer used, 6 to 24 hours per coat.
Risks
- Adhesion problems due to insufficient preparation or incorrect type of varnish.
- Damage: sharp objects or aggressive cleaning agents can affect the varnish layer.
- Color difference: with non-uniform preparation, the color may turn out uneven.
Laws and regulations
- Environmental requirements: the use of low-solvent or water-based paints is often mandatory.
- Occupational safety: when spraying professionally, rules apply for ventilation, respiratory protection and safe storage of lacquers.
- Standards: NEN-ISO 9001 (quality systems) and processing guidelines from paint manufacturers are often leading for professionals.
Cost estimate
The price depends on the size of the kitchen, the number of fronts and the chosen finish.
|
Kitchen Size |
Number of Fronts |
Average Price (Spraying) |
|
Small Kitchen |
8–12 |
€ 900 – € 1,500 |
|
Medium Kitchen |
13–20 |
€ 1,500 – € 2,200 |
|
Large kitchen |
21+ |
€ 2,200 – € 3,500+ |
Prices are indicative (2025) and vary by specialist and type of paint. Comparing via independent platforms such as jeofferte.nl can provide insight into current rates.
Practical examples
- Private clients: A 15-year-old kitchen with yellowed fronts was repainted in matte white, making it look like a modern kitchen again.
- Business clients: Project-based approach in rental apartments where multiple kitchens were sprayed in a short time to limit renovation costs.
Common Mistakes
- Spraying yourself without experience, leading to drips and uneven layers.
- Insufficient cleaning and degreasing, resulting in poor adhesion.
- Incorrect paint choice (e.g., wall paint instead of furniture paint).
Conclusion
Spraying a kitchen is an efficient and cost-effective way to give an existing kitchen a second life. Thanks to modern spraying techniques and high-quality paints, the finish can rival that of a factory-new kitchen. For both individuals and professionals, this method offers a durable and aesthetically pleasing alternative to kitchen replacement. Proper preparation, the right materials, and craftsmanship are crucial for the final result.
Benefits of kitchen spraying
Kitchen spraying has become increasingly popular in recent years, both among individuals looking to give their kitchen a new look and among professionals seeking cost-effective renovations. The benefits are not only aesthetic but also financial, technical, and sustainable.
Characteristics of the benefits
- Cost-effective: significantly cheaper than a complete kitchen renovation or replacement.
- Aesthetically high-quality: a sleek, even result without visible streaks.
- Durable: extends the lifespan of the existing kitchen.
- Flexible in finish: choice of hundreds of colors and different gloss levels.
- Time-saving: the process often takes only a few days instead of weeks.
Applications
The advantages of spray application are particularly evident in:
- Private homes: when residents want to modernize their kitchen without a complete replacement.
- Rental and sales projects: quick value increase of a property through a fresh, modern look.
- Commercial projects: large-scale renovations of apartment complexes or holiday parks where multiple kitchens are renewed in a short period.
Technical aspects of the benefits
- Even result: thanks to the fine mist of the spray technique, a smooth and uniform layer is created.
- Optimal adhesion: professional preparation (degreasing, sanding, priming) ensures a long lifespan.
- Versatile materials: suitable for wood, MDF and, in many cases, also for plastics.
Risks that are avoided
By choosing spraying instead of painting with a brush or roller, some common problems are avoided:
- No streaks or roller marks.
- Less chance of dust inclusions due to controlled spray booths.
- Longer durability of the finish when using 2-component lacquers.
Legislation and Regulations
- Environmental benefit: Respraying kitchen fronts is more sustainable than complete replacement, as existing materials are preserved. This aligns with European waste and recycling directives.
- Health and safety: the process complies with strict standards regarding fume extraction and paint processing at professional companies.
Cost estimate – comparison of benefits
|
Option |
Average cost |
Lifespan |
Appearance |
Durability |
|
New kitchen |
€ 8,000 – € 20,000 |
15 – 20 years |
Factory new |
Less sustainable (waste) |
|
Renovate kitchen (replace fronts) |
€ 3,500 – € 7,000 |
10 – 15 years |
Renewed |
Limited waste |
|
Spray paint kitchen |
€ 900 – € 3,500 |
8 – 12 years |
Sleek and modern |
Very durable (reuse) |
Comparing prices and options is easy via independent platforms such as jeofferte.nl.
Practical examples
- Example 1: A family home whose 12-year-old kitchen was sprayed in silk matte anthracite for €1,600, instead of a complete renovation for €9,000.
- Example 2: A property manager had 25 kitchens in an apartment complex sprayed, allowing the modernization to take place within budget and time limits.
Common Mistakes (and how benefits are lost)
- Inexperienced DIYers who spray without proper preparation, resulting in an uneven finish.
- Too little attention paid to color choice or gloss level, meaning the kitchen doesn't achieve the desired look.
- Cutting costs on types of paint, leading to reduced wear resistance and discoloration over time.
Conclusion
The advantages of spraying a kitchen are versatile: from cost savings and durability to a high-quality, sleek finish. For both individuals and professionals, it is a smart way to significantly improve the appearance and lifespan of a kitchen, without the high costs and waste of a complete replacement. Choosing to spray a kitchen means choosing a modern and responsible solution with excellent value for money.
Suitable kitchen parts for spray painting
Not every part of a kitchen is suitable for spray painting. The result and lifespan depend heavily on the material, construction, and usage load of the respective parts. A good understanding of which kitchen parts are suitable and which are not for spray painting is essential to achieve a durable and aesthetic final result. This chapter discusses the most important parts, including the technical conditions and points of attention.
Characteristics of suitable parts
- Smooth surface: The smoother and more porous the material, the better the adhesion.
- Removable: Loose fronts and panels are easier and neater to spray than fixed parts.
- Non-absorbent: Materials that absorb moisture (such as untreated softwood) require extra primer coats.
- Mechanically durable: Parts that are frequently touched or stressed must be resistant to wear.
Applications – which parts are suitable
- Fronts (kitchen doors and drawers)
- Most suitable for spray finishing.
- Possible with wood, MDF, and some plastics.
- Great visual impact, as fronts determine the look of the kitchen.
- Side panels and cabinet frames
- Fixed, but can be treated well if the kitchen is carefully masked on site.
- Skirting boards and filler pieces
- Often forgotten, but spraying creates a beautiful uniform whole.
- Important that they are thoroughly cleaned beforehand due to grease and dust accumulation.
- Handles and knobs
- Usually not sprayed, but replaced. If desired, spraying is possible, but wear and tear is high.
- Appliance and refrigerator panels
- For integrated appliances (such as a dishwasher with a front panel) the panel can easily be sprayed along.
- Open shelves and visible insides
- Depending on the finish, the inside of cabinets can also be sprayed, although this is often optional.
Technical aspects – material suitability
|
Material |
Suitability |
Remarks |
|
MDF |
Very suitable |
Provides a smooth finish; requires a thorough primer coat to prevent fiber absorption. |
|
Solid wood |
Well suited |
Grain pattern may sometimes remain visible; multiple coats needed. |
|
Veneer |
Suitable |
Requires good adhesion primer; risk of damage if sanded too coarsely. |
|
Plastic (melamine, laminate) |
Limited suitability |
Only for hard, smooth variants; special primer required. |
|
Metal (e.g. stainless steel panels) |
Possible |
Requires special adhesion primer and 2-component lacquer. |
|
Natural stone/worktops |
Not suitable |
Excessive load; risk of wear and damage. |
|
Tiles |
Limited suitability |
Only with tile coating and extra pre-treatment. |
Risks with unsuitable parts
- Worktops: due to intensive use and exposure to moisture, the risk of damage is high; therefore rarely recommended.
- Handles and fittings: frequent contact causes rapid wear of the lacquer layer.
- Plastic parts: soft plastics have poor adhesion and discolor quickly.
Laws and regulations
- Environmental aspects: When spraying large, solid parts on site, rules for ventilation and extraction apply in accordance with occupational health and safety and environmental legislation.
- Standards: Manufacturers of spray paints often refer to the NEN-EN 927 standard for paint and varnish systems on wood and derivatives.
- Safety: When dismantling kitchens, attention must be paid to electricity (e.g., with built-in lighting).
Cost estimate – dependent on parts
The price for spraying kitchens varies greatly based on the number and type of parts.
|
Part |
Average additional cost (compared to fronts only) |
|
Side panels |
€150 – €300 per kitchen |
|
Plinths/fitting pieces |
€100 – €200 per kitchen |
|
Interior sides |
€ 200 – € 400 extra |
|
Appliance fronts |
€ 75 – € 150 per piece |
For an accurate comparison of costs and options, independent platforms such as jeofferte.nl can be used.
Practical examples
- Example 1: A corner kitchen with 18 fronts, side panels and plinths sprayed in satin white. Result: a uniform, fresh look for € 2,100.
- Example 2: A landlord had only the fronts of 12 rental kitchens sprayed, without insides, to limit costs but still achieve a modern effect.
Common Mistakes
- Forgotten skirting boards and filler pieces: this leads to color differences and an incomplete overall look.
- Spraying unsuitable worktops: the finish often deteriorates quickly here.
- Spraying handles: this almost always leads to rapid wear and an unkempt appearance after a few months.
Conclusion
Not all kitchen parts are equally suitable for spraying. The greatest visual impact is achieved by treating fronts, side panels, and plinths. Worktops and handles are generally not recommended due to the high usage load. By making a clear plan in advance and selecting the right parts, the kitchen can be given a completely new look cost-effectively. A comparison via platforms such as jeofferte.nl helps in finding the right specialist and understanding the costs.
Preparing the kitchen for spray painting
Spray painting a kitchen may seem straightforward at first glance, but success largely depends on preparation. Without thorough cleaning, sanding, and repair work, the paint layer will not adhere properly, and the finish will quickly lose its shine or start to peel. This chapter describes step-by-step how to properly prepare a kitchen for professional spray painting.
Characteristics of good preparation
- Optimal adhesion: A clean, grease-free, and roughened surface ensures maximum paint grip.
- Neat final result: Sanding and filling eliminate unevenness.
- Durability: A correctly built-up substrate extends the lifespan of the coating.
- Efficiency: Working systematically limits errors and rework.
Applications
The preparation applies in principle to all sprayable kitchen components:
- Fronts (doors and drawers).
- Side panels and filler panels.
- Plinths and frames.
- Separate appliance fronts.
Technical aspects of the preparation
1. Disassembly
- Fronts, drawers, and hinges are removed to be treated separately.
- Hardware, handles, and built-in panels are disassembled to prevent overspray.
2. Cleaning and degreasing
- Use of special degreasers (e.g., ammonia-based or industrial degreasers).
- Multiple cleaning rounds are often necessary for grease deposits around cooking zones.
3. Sanding
- Grit 120 – 180 for rough sanding.
- Grit 220 – 320 for fine sanding.
- With MDF and wood, intermediate sanding is crucial to smooth raised fibers.
4. Repairs
- Cracks, dents, or chipped corners are filled with 2-component filler.
- Veneer is glued or reinforced as needed before it can be sprayed.
5. Priming
- MDF and wood require a special insulating primer.
- Plastic and melamine require an adhesion primer.
- Primer ensures a uniform surface and prevents stains or grain from showing through.
6. Masking and protecting
- Unsprayed areas (such as walls, floors, equipment) are masked with foil and tape.
- Professional spraying companies often use an enclosed spray booth or mobile cabin to minimize dust and fumes.
Risks of poor preparation
- Poor adhesion → paint peels or flakes off after a few months.
- Uneven surface → imperfections and dust particles remain visible.
- Discolored spots → insufficient primer can allow old stains to show through.
- Extra costs → repairs after poorly prepared spray work are often more expensive than good preparation beforehand.
Legislation and Regulations
- Occupational health and safety standards: When sanding MDF, dust extraction must be present due to harmful particles.
- Environmental requirements: Masking materials and sanding dust must be disposed of according to local environmental regulations.
- Product guidelines: Primers and degreasers must comply with EU safety standards (REACH regulation).
Cost Estimate – Preparation
Preparation is an important part of the total costs.
|
Component |
Average costs (indication) |
|
Dismantling & assembly |
€ 150 – € 300 |
|
Degreasing & sanding |
€ 200 – € 400 |
|
Repairs & Filling |
€ 50 – € 150 per kitchen |
|
Applying primer |
€ 100 – € 250 |
The total preparation can cost between € 500 and € 1,000, depending on the condition and type of kitchen. Compare quotes through platforms like jeofferte.nl to get an insight into the breakdown of these costs.
Practical examples
- Example 1: A 15-year-old kitchen with heavy grease deposits around the hob required three intensive cleaning rounds before the primer could be applied. Proper preparation ensured a smooth and durable final result.
- Example 2: An MDF kitchen in a rental property had several damaged fronts. After filling, sanding, and priming, the kitchen was sprayed an even black and made suitable for intensive use.
Common Mistakes
- Do not disassemble fronts, leading to poorly sprayed edges.
- Insufficient degreasing → residues of cleaning agents and grease cause adhesion problems.
- Choosing the wrong primer → paint peels off faster on plastic surfaces.
- Skipping masking → overspray damages walls and floors.
Conclusion
Good preparation is the key to a flawless and durable final result when spraying kitchens. From degreasing and sanding to priming and masking, each step directly influences the lifetime of the paint layer. Professional companies often spend as much time on preparation as on the actual spraying. By not underestimating this process and comparing multiple quotes via platforms such as jeofferte.nl, the client can be assured of a technically correct and durable finish.
Colors and finishes when spraying kitchens
A significant advantage of kitchen spraying is the enormous freedom of choice in color and finish. Whereas a standard kitchen is often limited to a few factory colors, with spray work, practically any shade and gloss level can be achieved. This makes kitchen spraying not only a renovation method but also a way to fully personalize the kitchen. In this chapter, the possibilities, techniques, and points of attention regarding color and finish will be discussed in detail.
Characteristics of colors and finishes
- Virtually unlimited color choice: all RAL, NCS and custom colors are possible.
- Finish variants: matte, satin gloss, high gloss or metallic.
- Durability: the finish determines the degree of scratch and stain resistance.
- Trend analysis: colors and finishes often follow living and design trends, such as matte tones and natural color nuances.
Applications
The choice of a color or finish depends on:
- Private homes: timeless neutral shades (white, cream, grey, black) are popular.
- Designer kitchens: high-gloss or special metallic and concrete-look coatings for a luxurious appearance.
- Project-based (rental/sale): light, neutral colours ensure broad appeal.
- Professional use (hospitality/canteens): matte or satin gloss coatings with high scratch resistance.
Technical Aspects
1. Colours
- RAL colors: most commonly used; offers standardization and unambiguous color indication.
- NCS (Natural Color System): more extensive palette, often used by architects and interior designers.
- Custom colors: possible by mixing; useful for matching existing furniture or interior colors.
2. Finishes
- Matte: modern and sleek, but more sensitive to stains and fingerprints.
- Satin: the most chosen balance between appearance and ease of maintenance.
- High gloss: luxurious and reflective effect, but requires more maintenance; minor damage is more noticeable.
- Special effects:
- Metallic or pearlescent paints.
- Concrete look or textured coatings.
- Transparent lacquer layers for wood structure.
3. Influence on durability
- High-gloss and satin-gloss lacquers are easier to wash and resistant to moisture.
- Matte lacquers require more maintenance, but modern PU systems offer improved scratch resistance.
Risks when choosing colour and finish
- Discoloration: Light colors (white, cream) can yellow over time with poor paint quality.
- Color deviation: Without the use of standard RAL/NCS codes, color reproduction can be difficult for future repairs.
- Too trend-sensitive: Very pronounced colors can age in appearance after a few years.
Laws and regulations
- Standardization: color codes (RAL/NCS) ensure uniformity and clarity.
- Environmental requirements: solvent-based metallic and special coatings are subject to strict VOC regulations.
- Safety: high-gloss paints with 2-component systems often contain substances that may only be processed in professional spray booths.
Cost estimation – influence of finishing
|
Finish type |
Average surcharge (per kitchen) |
Remarks |
|
Matt/satin standard RAL |
No surcharge |
Most common |
|
High gloss |
+ € 200 – € 500 |
More intensive spraying process, more layers of paint |
|
Metallic/pearlescent |
+ € 400 – € 800 |
More expensive paints and extra labor |
|
Special effects |
+ € 500 – € 1,000+ |
Depending on type and technique |
For a good overview of the price differences between types of paint and finishes, it is advisable to compare multiple quotes via independent platforms such as jeofferte.nl.
Practical examples
- Example 1: A family opted for satin white RAL 9010 for a timeless look; cost: €1,800.
- Example 2: A designer kitchen in a villa was sprayed in high-gloss black (RAL 9005), with a mirror effect; total surcharge compared to satin finish: €450.
- Example 3: A catering kitchen received a scratch-resistant PU coating in satin anthracite, chosen to limit wear and tear from intensive use.
Common Mistakes
- Insufficient consultation on color codes: choosing a "white" without an RAL code leads to discussions afterwards.
- High gloss in busy households: fingerprints and scratches are visible, increasing maintenance.
- Matte in cooking zones: grease and dirt stains are harder to clean.
- Trend colors without consideration: a fashionable color can go out of style within 2-3 years.
Conclusion
When spraying kitchens, the possibilities in terms of color and finish are virtually unlimited. From timeless matte white to high-gloss design or even metallic effects: everything is technically possible, provided the right lacquer and finish are chosen. An important balance is between appearance, ease of maintenance, and durability. By recording color codes and comparing quotes via platforms such as jeofferte.nl, one can make a well-considered choice that offers years of enjoyment and a high-quality appearance.
Costs of kitchen spraying
The costs of kitchen spraying are considerably lower than those of a full kitchen renovation or replacement. Nevertheless, prices vary depending on factors such as the number of fronts, the chosen paint type, the desired finish, and the condition of the kitchen. This chapter explains all cost-determining elements, including average indicative prices, cost breakdown, and practical examples.
Characteristics of the cost structure
- Labor: Cleaning, sanding, filling, priming, and spraying requires craftsmanship and time.
- Material: Paint types (standard or 2-component) and primers influence the price.
- Kitchen size: The more fronts, the higher the cost.
- Finish: High gloss or metallic costs more than standard matte or satin gloss.
Applications
- Private individuals: often focused on beautification and cost savings.
- Property managers/landlords: project-based to affordably refresh multiple kitchens.
- Hospitality and utility: functional and wear-resistant, less focus on design, more on durability.
Technical aspects that influence the price
- Preparation: a lot of grease or damage means more sanding and putty work.
- Type of paint: water-based paints are cheaper, 2-component PU paints are more expensive but more wear-resistant.
- Finish: matt and satin gloss are standard; high gloss or special effects require more layers and labor.
- Location: spraying in a professional booth is often cheaper and of better quality than spraying on-site.
Risks with cost savings
- Cheap providers sometimes use inferior lacquers that fade or get damaged faster.
- Insufficient preparation can lead to higher repair costs.
- Doing it yourself without experience may seem cheaper, but often leads to uneven results and additional costs for repair by a professional.
Laws and regulations
- Labor costs: fall under the collective labor agreement for Painting and Finishing Companies (professional rates vary).
- Environmental levies: waste materials and surplus paints must be disposed of according to environmental legislation, which may be included in the price.
- VAT: In the Netherlands, 21% VAT applies, but for renovation and repair work on private homes older than 2 years, a lower VAT rate (9%) may apply to certain activities.
Cost estimate – average prices
Below is an overview of indicative prices in 2025.
Total price per kitchen size
|
Kitchen size |
Number of fronts |
Indicative price (incl. labor & material) |
|
Small kitchen |
8–12 |
€ 900 – € 1,500 |
|
Average kitchen |
13–20 |
€ 1,500 – € 2,200 |
|
Large kitchen |
21+ |
€ 2,200 – € 3,500+ |
Cost per item
|
Part |
Average price (indication) |
|
Fronts (per piece) |
€ 60 – € 120 |
|
Drawer fronts (per piece) |
€ 30 – € 80 |
|
Side panels (per piece) |
€75 – €150 |
|
Skirting boards and filler pieces |
€100 – €200 per kitchen |
|
Inside of cabinets |
€200 – €400 extra |
|
Appliance fronts |
€75 – €150 per piece |
Costs per finish type
|
Finish type |
Additional charge per kitchen |
Explanation |
|
Matte or satin finish (RAL) |
– |
Included as standard |
|
High gloss |
+ € 200 – € 500 |
Extra coats of paint needed |
|
Metallic/pearlescent |
+ € 400 – € 800 |
More expensive paints |
|
Special effects |
+ € 500 – € 1,000+ |
Depending on technique |
Practical examples
- Example 1: A small kitchen with 10 fronts and 2 side panels sprayed in satin white. Total cost: €1,350.
- Example 2: A medium-sized kitchen (18 fronts) in high-gloss black with plinths and matching pieces sprayed along. Total cost: € 2,450.
- Example 3: A landlord had 20 kitchens in apartments sprayed with standard RAL 9010 satin finish. Cost per kitchen: €1,600 (project discount applied).
Common mistakes in cost estimation
- Only look at the total price and not at the breakdown of labor, materials, and finishing.
- Choose cheap providers without paying attention to the types of paint used and guarantees.
- Do not take into account extras such as skirting boards or insides, which are often charged separately.
Conclusion
The cost of spraying kitchens averages between €900 and €3,500, depending on the size, material choice, and finish. Although this is considerably cheaper than a full kitchen renovation or replacement, it is important not to focus solely on price, but especially on the quality of preparation and the paints used. Comparing multiple quotes through an independent platform like jeofferte.nl provides insight into market prices and helps in finding a reliable specialist with the right price-quality ratio.
DIY vs. professional job
When it comes to spraying kitchens, there are roughly two options: doing the spraying yourself or hiring a professional company. Both options have pros and cons. For individuals, DIY seems attractive due to lower direct costs, while professionals ensure a smoother and more durable result. This chapter covers the differences, risks, and costs of both methods.
Features
- Do-It-Yourself (DIY): lower costs, more time investment, dependent on experience and material usage.
- Professional: higher price, but guaranteed even and durable result.
- Influence on lifespan: the quality of the preparation and the lacquers used determines how long the result remains beautiful.
Applications
- DIY: suitable for small kitchens, temporary solutions, or for people with experience in spray techniques.
- Professional: recommended for medium to large kitchens, design projects, or when durability and warranty are important.
Technical Aspects
Do-It-Yourself
- Preparation: often underestimated; cleaning, sanding, filling, and priming are time-consuming.
- Spraying equipment: many DIYers use paint sprayers from hardware stores (HVLP system), which produce less paint mist but do not provide the same coverage and uniformity as professional airless spraying equipment.
- Types of paint: DIYers usually use 1-component water-based paints; these are cheaper but less durable.
- Risks: uneven spray pattern, drips, dust inclusions, and poor adhesion.
Professional
- Preparation: systematic and according to fixed protocols; often as much work as the spraying itself.
- Equipment: industrial airless or HVLP spray equipment in spray booths with optimal humidity and dust extraction.
- Paint types: high-quality 2-component PU paints or industrial coatings with much higher scratch and abrasion resistance.
- Result: smooth, even, and factory-quality finish.
Risks
DIY Risks
- Poor adhesion → paint peels off quickly.
- Aesthetic flaws → streaks, drips, or uneven color.
- Incorrect product choice → using wall or wood paint instead of furniture paint.
- No warranty → repairs for mistakes are often more expensive than having it done professionally the first time.
Professional risks
- Higher price.
- Dependence on the planning and availability of a spraying company.
- Possible additional costs for transport/disassembly if the kitchen is not sprayed on-site.
Laws and regulations
- DIY: no direct regulation, but the use of solvent-based products indoors can pose health risks.
- Professional: companies are obliged to work with extraction systems, respiratory protection and to comply with occupational health and environmental regulations (VOC rules, waste disposal).
- Warranty: professional companies often provide a 2–5 year warranty on adhesion and color fastness, which DIY obviously does not offer.
Cost Estimate
Comparison DIY vs. Professional
|
Aspect |
Do It Yourself (DIY) |
Have it done professionally |
|
Material costs |
€ 200 – € 400 |
Included in the total price |
|
Equipment (rent/buy) |
€ 100 – € 300 |
Included (industrial systems) |
|
Total price small kitchen |
€ 300 – € 600 |
€ 900 – € 1.500 |
|
Total price average kitchen |
€ 400 – € 700 |
€ 1,500 – € 2,200 |
|
Total price large kitchen |
€ 500 – € 800 |
€ 2,200 – € 3,500+ |
|
Lifespan result |
2–5 years |
8–12 years |
|
Warranty |
None |
2–5 years |
To gain insight into price differences between providers, it is wise to compare multiple quotes via platforms such as jeofferte.nl.
Practical examples
- Example 1 – DIY: A private individual sprayed their small kitchen (9 fronts) themselves with hardware store paint and an HVLP sprayer. Material costs €350. The result was acceptable, but after 2 years, the paint started to peel around the handles.
- Example 2 – Professional: A medium-sized kitchen (16 fronts) was professionally sprayed with 2-component PU lacquer in satin white. Costs: €1,950. Result: sleek and durable, with a 3-year warranty.
- Example 3 – Project-based: A property manager had 30 kitchens professionally sprayed in a neutral RAL 9016 color. Costs per kitchen €1,550 (project discount), lifespan at least 10 years.
Common Mistakes
- With DIY:
- Insufficient sanding and degreasing.
- Wrong primer on plastic surfaces.
- Too thick coats of paint causing drips.
- With professional application:
- Only looking at the lowest price instead of used paint types and warranty conditions.
Conclusion
Spraying a kitchen yourself may be cheaper in the short term, but carries significant risks in terms of adhesion, aesthetics, and durability. Professional spraying delivers a factory-quality result, a longer lifespan, and often a warranty. For those who value quality, durability, and a perfect end result, investing in a professional company is usually the wisest choice. For a reliable price comparison, it is advisable to request multiple quotes through independent platforms such as jeofferte.nl.
Maintenance of a sprayed kitchen
A sprayed kitchen, if properly maintained, can last for many years and retain its appearance. Maintenance varies depending on the type of lacquer and finish (matte, satin, high gloss) and requires a systematic approach. Correct cleaning, avoiding aggressive agents, and timely repair of minor damage will significantly extend its lifespan.
Characteristics of maintenance
- Regular cleaning prevents grease buildup and discoloration.
- Gentle cleaning methods protect the paintwork from scratches.
- Maintenance intervals depend on usage intensity and finish.
- Repairability: minor damage can often be easily touched up.
Applications
- Private kitchens: maintenance primarily focused on aesthetics and maintaining shine.
- Professional use (hospitality, healthcare facilities): emphasis on hygiene and scratch resistance.
- Rental projects: maintenance is crucial to maximize lifespan and limit future replacement costs.
Technical aspects of maintenance
1. Daily Maintenance
- Clean with a soft, damp cloth (microfiber).
- Use mild cleaning agents (pH-neutral).
- Avoid abrasive sponges or scouring pads.
2. Weekly Maintenance
- Remove grease and food residue with a mild dish soap solution.
- Always dry with a soft cloth to prevent water spots.
3. Periodic Maintenance
- Check hinges and handles to prevent mechanical damage from misaligned doors.
- For high-gloss finishes: Lightly buff with a soft cloth to maintain shine.
- For matte finishes: Use special cleaners for matte lacquer to prevent shiny spots.
4. Protection
- Do not place hot pans or appliances against the fronts (heat can damage the lacquer).
- Avoid prolonged contact with moisture (e.g. with dishwasher fronts).
- Use door stoppers to prevent collisions and lacquer damage.
5. Repair and restoration
- Minor scratches can sometimes be touched up with a color pen or paint pen in the same RAL color.
- For deeper damage, a front can be repainted.
- Professional touch-up or repair services significantly extend the lifespan.
Risks of poor maintenance
- Fat accumulation → lacquer becomes sticky and discolors.
- Scratches → occur when using abrasive cleaning agents.
- Moisture effect → lacquer can peel off at seams and edges.
- Loss of shine → especially with high gloss due to the use of incorrect polishing agents.
Legislation and Regulations
- Hygiene requirements: In the hospitality industry, the HACCP guideline applies, which mandates smooth, easily cleanable surfaces.
- Safety: Cleaning agents must comply with EU standards for consumer and professional use (CLP regulation).
- Environment: The use of environmentally friendly cleaning agents is increasingly encouraged, also in private households.
Cost Estimate – Maintenance and Repair
|
Part |
Cost indication (2025) |
|
Regular maintenance (cleaning supplies) |
€ 20 – € 50 per year |
|
Touch-up pen/paint pen for minor repairs |
€ 10 – € 30 |
|
Repair of minor damage (professional respraying) |
€ 75 – € 150 |
|
Complete respray of one front |
€ 60 – € 120 |
|
Major maintenance (complete kitchen respray after 8–12 years) |
€ 1,200 – € 2,500 |
By performing timely maintenance and small repairs, high costs for complete respraying can often be postponed for years. Compare quotes for repair work via jeofferte.nl to gain insight into the variation between providers.
Practical examples
- Example 1: A sprayed kitchen in satin white was still found to be in excellent condition after 6 years, thanks to weekly mild maintenance and the use of microfiber cloths.
- Example 2: A high-gloss black kitchen lost its shine within 2 years due to the use of aggressive cleaning agents. Professional polishing and repair cost €350.
- Example 3: In a catering kitchen, 3 damaged fronts had to be resprayed after 4 years. Total repair costs: €360, significantly cheaper than a full renovation.
Common Mistakes
- Cleaning with chlorine, ammonia or abrasive cleaners → damages the lacquer layer.
- Too little maintenance, causing grease to build up and be difficult to remove.
- No attention to moisture load around the dishwasher and sink → lacquer blisters and discoloration.
- Failure to promptly repair minor damage → increases the chance of extensive damage.
Conclusion
Good maintenance is the key to a long lifespan and lasting appearance of a sprayed kitchen. With simple, regular cleaning and careful use, the lifespan can be extended to 10 years or more. Minor damage is often easy to repair, while poor maintenance can lead to high repair costs. For those who want to guarantee durability and quality, it is wise to plan periodic maintenance and compare multiple quotes for larger damage via independent platforms such as jeofferte.nl.
Common mistakes when spraying kitchens
Although spraying kitchens is an excellent method to give a kitchen a second life, in practice it often goes wrong due to improper preparation, product choice, or execution. Both DIYers and sometimes less experienced professionals make mistakes that lead to a shorter lifespan, poor adhesion, or an aesthetically disappointing result. By knowing and avoiding these pitfalls, one can save a lot of time and money.
Characteristics of common mistakes
- Often arise from lack of experience or incomplete preparation.
- Have direct consequences for adhesion, appearance, and durability.
- Are usually only visible after spraying (blisters, drips, color differences).
- Lead to additional rework, which is often more expensive than doing it right the first time.
Applications where errors often occur
- DIY spray painting: incorrect paint types, insufficient preparation, and poor equipment.
- Quick budget jobs: too little time for degreasing and priming.
- Project-based work: insufficient quality control when working on multiple kitchens simultaneously.
Technical errors
1. Insufficient preparation
- Not degreasing or poor degreasing → paint does not adhere and peels off.
- Insufficient sanding → smooth surfaces (like plastic) remain very smooth, paint adheres poorly.
- Not using a primer → especially with MDF and plastic, rapid detachment occurs.
2. Incorrect product choice
- Use of wall paint or standard wood varnish instead of furniture varnish or PU varnish.
- Cheap spray paints without UV resistance → rapid yellowing.
- Incorrect primer → poor adhesion on melamine or veneer.
3. Execution errors
- Coats too thick → runs, sags, and uneven spray pattern.
- Uneven coverage → color differences visible in glancing light.
- Insufficient drying time between coats → coats react with each other, causing cracks or blisters.
- Spraying in a dusty environment → dust inclusions in the paint.
4. Incorrect color and gloss selection
- High gloss in busy households → fingerprints and scratches are highly visible.
- Matte in cooking zones → more difficult to clean and grease stains visible faster.
- No fixed RAL or NCS code → color is difficult to reproduce later.
5. Poor finishing and assembly
- No attention to skirting boards and fitting pieces → the kitchen looks unfinished.
- Spraying handles and fittings → wear and tear and unsightly spots after a few months.
- Poor assembly after spraying → damage to the fresh paint.
Risks of these mistakes
- Aesthetic loss: uneven result, color differences, visible imperfections.
- Technical failure: paint peels off, flakes, or discolors quickly.
- Financial damage: repair costs can run into hundreds of euros, sometimes more than the original savings.
- Time loss: a poorly executed project often has to be redone completely.
Legislation and Regulations
- Health risks: working without adequate ventilation or mouth protection when using solvent-based paints.
- Occupational health and safety standards: mandatory use of protective equipment and spray booths for professional spraying.
- Environmental regulations: improper disposal of residues (paint, solvents, masking tape) is legally prohibited.
Cost Estimate – Rectification of Errors
|
Error |
Remedy |
Cost Estimate |
|
Drips or runs |
Sand and respray |
€ 200 – € 400 |
|
Poor adhesion (peeling) |
Respray fronts |
€ 800 – € 1,500 |
|
Dust inclusion |
Polish or respray |
€ 150 – € 400 |
|
Wrong color |
Respray entire kitchen |
€ 1,200 – € 2,500 |
Compare quotes for repairs via platforms like jeofferte.nl, to avoid unnecessarily high repair costs.
Practical examples
- Example 1 – DIY: A private individual used wall paint and a DIY store sprayer on melamine fronts. Within 6 months, the paint came loose around the handles. Repair by a professional cost €1,250.
- Example 2 – Budget Company: A sprayer delivered a kitchen with dust inclusions by spraying in an open garage. After a complaint, the entire kitchen had to be resprayed.
- Example 3 – Project-based: In an apartment complex, 20 kitchens were sprayed without a proper primer. Within 2 years, blisters appeared on multiple fronts. Additional costs for repair: €15,000.
Common mistakes summarized
- Poor preparation (degreasing, sanding, priming).
- Incorrect paint and primer choice.
- Careless spraying (drips, dust, unevenness).
- Ill-considered color and gloss choice.
- Sloppy finishing and assembly.
Conclusion
Most mistakes when spraying kitchens are caused by haste, lack of experience, or incorrect product choice. They lead to a shorter lifetime and extra repair costs. Professional spraying, carried out with the right preparation and materials, prevents these problems. For those who want certainty, it is wise to compare several specialized companies through independent platforms like jeofferte.nl.
Inspiration and practical examples for spraying kitchens
A sprayed kitchen can completely transform from outdated to modern, from standard to designer, and from dull to personal. Because the possibilities are virtually unlimited in terms of color and finish, it helps to look at concrete examples and trends. This chapter provides a broad overview of inspiring applications and practical examples, ranging from private kitchens to large-scale renovation projects.
Characteristics of inspiring applications
- Widely applicable: suitable for both modern and classic kitchens.
- Stylish: choice of hundreds of colors and finishes.
- Sustainable: existing kitchens get a second life.
- Affordable custom work: relatively low cost for a big visual impact.
Applications – Style Directions
1. Timeless and neutral
- White and cream: RAL 9010 or RAL 9001 satin gloss, ideal for light and fresh interiors.
- Shades of grey: Neutral colors such as RAL 7047 (telegrau) provide a modern, calm appearance.
2. Modern and industrial
- Matte black (RAL 9005): sleek, minimalist and popular in lofts and new constructions.
- Anthracite and dark grey: in satin gloss, often combined with stainless steel and concrete-look countertops.
3. Luxury and design
- High-gloss finishes: black, deep blue or burgundy for an exclusive look.
- Metallic and mother-of-pearl: provide a striking and unique effect, often used in designer kitchens.
4. Natural and warm
- Earth tones: sand, beige, and taupe in matte finishes.
- Green tones: from olive green to sage, increasingly popular in rustic and modern settings.
Technical aspects for inspiration
- High-gloss lacquers provide more depth, but are more sensitive to maintenance.
- Matte coatings are modern and stylish, but more sensitive to grease stains.
- 2-component lacquers ensure that even intensively used kitchens remain beautiful for a long time.
Risks with inspiration choices
- Overly trendy colours can age faster.
- High-gloss black looks beautiful, but makes fingerprints very visible.
- Insufficient consideration of combinations with the worktop and floor sometimes leads to a less harmonious end result.
Laws and regulations
Although inspiration is primarily aesthetic, technical rules also play a part:
- NEN-EN 927 standardization guarantees durable lacquers for wood applications.
- VOC regulations limit solvents in special lacquers (e.g., metallic).
- HACCP-compliant finishes in hospitality: smooth, washable, and hygienic.
Cost estimation – practical cases
|
Kitchen type |
Execution |
Cost indication |
|
Small rental kitchen |
Satin white, fronts only |
€ 1,100 |
|
Medium-sized family kitchen |
Matte anthracite + plinths and side panels |
€ 2,000 |
|
Luxury villa kitchen |
High gloss black with metallic finish |
€ 3,200 |
|
Project-based (20 pieces) |
RAL 9016 satin gloss, standard PU lacquer |
€ 1,550 per kitchen |
By comparing prices and options via platforms such as jeofferte.nl, both private individuals and property managers can make the best choice.
Practical examples
Private individual – transformation from classic to modern
An oak kitchen from 2005 was completely sprayed in silk-gloss white. The grain remained subtly visible, preserving its character while giving it a fresh and modern look. Cost: €1,850.
Design project – high-gloss designer kitchen
A villa kitchen with 22 fronts was sprayed in high-gloss black (RAL 9005) with a mirror effect. The end result was on par with a new designer kitchen costing over €25,000, while the spraying costs amounted to €3,400.
Property Management – Project-Based Approach
A housing association had 30 rental kitchens in apartment complexes sprayed in standard RAL 9010 satin gloss. The uniform approach made all homes look fresh and ready for sale or rent. Costs: €1,600 per kitchen.
Hospitality Application – Durable PU Coating
A commercial kitchen was coated with a scratch-resistant 2-component PU lacquer in satin gloss anthracite. The lacquer met HACCP requirements and was easy to clean even with intensive use. Total costs: €2,700.
Common Mistakes in Inspiration and Practice
- Blindly following trends (e.g., bright blue or yellow kitchens) without considering if the interior will still support it in 5 years.
- Not taking into account the incidence of light: dark colors can optically reduce the size of a small kitchen.
- Forgetting to include countertops and backsplashes in the color choice, leading to a mismatch.
Conclusion
Inspiration and practical examples show that kitchen spraying offers virtually endless possibilities. From timeless white to luxurious high-gloss black or even metallic effects – every style is achievable. By viewing examples and comparing costs and possibilities through an independent platform like jeofferte.nl, one can make informed choices that fit the budget, style, and use. A sprayed kitchen is therefore not only a practical renovation solution but also an aesthetic statement in any interior.
