What does plastering cost and what should you pay attention to?

Spachtelputz is a hard decorative plaster with a fine, granular structure. It is durable and popular for both walls and ceilings.

Price per m²

• Inside: € 16 – € 27 per m²
• Outside (facade): € 55 – € 82 per m²

Example costs inside

• 30 m²: € 480 – € 810
• 50 m²: € 800 – € 1.350
• 80 m²: € 1.280 – € 2.160

Example costs outside (facade)

• 30 m²: € 1,650 – € 2,460
• 50 m²: € 2,750 – € 4,100
• 80 m²: € 4,400 – € 6,560

Extra costs

• Leveling the surface: € 10 – € 20 per m²
• Taping and protecting: depending on the situation
• Starting rate: for surfaces smaller than 30 m² a fixed amount of € 290 – € 420 often applies

Factors that influence the price

1. Size of the surface (economies of scale for larger surfaces)
2. Condition and preparation of the surface
3. Inside or outside (exterior work is more expensive)
4. Accessibility of the walls
5. Region and experience of the professional

Advantages of Spachtelputz

• Wear-resistant and impact-resistant
• Low maintenance
• Available in many colors
• Suitable for both indoor and outdoor use

Conclusion

For spachtelputz in 2025, the costs average € 16 – € 27 per m² indoors and € 55 – € 82 per m² outdoors.
By comparing quotes, for example via jeofferte.nl, you get a clear picture of the total costs and the quality of the professional.

Spachtelputz

• Inside: € 16 – € 27 per m²
• Outside (facade): € 55 – € 82 per m²

Alternatives inside

• Sausklaar stucwerk: € 16 – € 27 per m²
• Spackspuitwerk: € 8 – € 13 per m²
• Granol (inside): € 13 – € 22 per m²
• Leemstuc: € 44 – € 66 per m²
• Polished concrete / microcement: €120 – €180 per m²
• Tadelakt: €165 – €275 per m²

Alternatives outside

• Granol (exterior): €49 – €71 per m²
• Whitewashing: €49 – €66 per m²
• Exterior plaster with insulation: €98 – €153 per m²

Notes

• For smaller jobs (<30 m²), there is often a minimum charge of €290 – €420 on top of the price per m².
• Prices are indicative and are influenced by area, substrate, accessibility, and the tradesperson's experience.

Conclusion

In 2025, the costs for textured plaster and alternative finishes will range from €8 per m² (spray plaster) to €275 per m² (tadelakt).
By comparing quotes, for example via jeofferte.nl, an accurate price estimate can be obtained.

1. Surface area

• Larger surfaces are relatively cheaper.
• For small jobs (under 30 m²) a starting rate of € 290 – € 420 is often charged in addition to the m² price.

2. Inside or outside

• Exterior work (facades) is more expensive than interior work.
• Reason: weather-resistant materials, extra layers and often scaffolding.

3. Condition of the substrate

• Loose old stucco or damaged walls must first be repaired.
• Pre-treatment such as leveling and priming increases the price.

4. Accessibility

• Work at height or difficult to access facades (e.g. back gardens without passage) can incur extra costs due to scaffolding and more working hours.

5. Region and experience of the professional

• Rates are often higher in urban areas.
• An experienced plasterer or facade specialist can charge more, but delivers a tighter and more durable result.
• Quotes via jeofferte.nl provide insight into price differences.

6. Color and Finishing

• Special colors or combinations may require extra labor or more material.
• An extra protective finish may be recommended for exterior facades.

7. VAT rate

• 9% VAT: homes older than 2 years, including labor and materials.
• 21% VAT: new construction or if you supply the materials yourself.

Conclusion

The price for spachtelputz is influenced by surface area, inside/outside, preparation, accessibility and experience of the professional.
Comparing quotes, for example via jeofferte.nl, provides insight into these cost differences.

Inside (walls/ceilings)

Price per m²: € 16 – € 27

• 30 m²: € 480 – € 810
• 50 m²: € 800 – € 1.350
• 80 m²: € 1.280 – € 2.160

Outside (facade)

Price per m²: € 55 – € 82

• 30 m²: € 1.650 – € 2.460
• 50 m²: € 2.750 – € 4.100
• 80 m²: € 4.400 – € 6.560

VAT

• 9% VAT for homes older than 2 years (labor and material via professional).
• 21% VAT for new construction or self-purchased materials.

What can influence the price?

• Substrate and preparation (repair, leveling)
• Inside or outside (exterior work more expensive)
• Accessibility (scaffolding needed?)
• Experience of the professional
• Starting rate for small surfaces (<30 m²)

Conclusion

For spachtelputz, the price ranges from a few hundred euros for small interiors to a few thousand euros for complete facades.
By comparing quotes, for example via jeofferte.nl, you get a accurate picture of the total costs.

1. Combine jobs

• Have multiple rooms or facades done at once.
• This saves start-up costs and often results in a lower price per m².

2. Compare multiple quotes

• Price differences between professionals can be significant.
• By comparing quotes, for example via jeofferte.nl, you get a better picture of price and quality.

3. Do preparatory work yourself

• Remove loose plaster, old paint or wallpaper and free the walls.
• This means that the plasterer has to spend less time on preparatory work.

4. Choose the right period

• Outside the peak season (autumn and winter), professionals are often more flexible and the price may be more favorable.

5. Avoid small, loose jobs

• For small surfaces, a starting rate of € 290 – € 420 often applies.
• By bundling small orders, you only pay this rate once.

6. Regular maintenance

• Check exterior walls regularly and have minor damage repaired quickly to avoid expensive major repairs.

Conclusion

With good preparation, smart planning and comparing quotes via, for example, jeofferte.nl, the costs for spachtelputz can be significantly reduced without compromising the end result.

1. Smooth plaster

• Description: Smooth plaster that can be painted or wallpapered directly after drying.
• Price indication: € 16 – € 27 per m²
• Characteristic: Popular for interior finishing, simple and neutral.

2. Spray plaster

• Description: Machine-sprayed finish with a light granular structure.
• Price indication: € 8 – € 13 per m²
• Characteristic: Very affordable and quick to apply; especially suitable for large surfaces.

3. Granol

• Description: Texture plaster with a coarser grain than spachtelputz.
• Price indication:
• Inside: € 13 – € 22 per m²
• Outside: € 49 – € 71 per m²
• Characteristic: Sturdy and decorative, with a slightly more rustic appearance.

---

4. Clay plaster

• Description: Natural plaster based on clay, environmentally friendly and moisture-regulating.
• Price indication: € 44 – € 66 per m²
• Characteristic: Warm and natural appearance, suitable for indoors.

---

5. Beton ciré / Microcement

• Description: Seamless and waterproof finish with a sleek, modern look.
• Price indication: € 120 – € 180 per m²
• Characteristic: Luxurious finish, ideal for bathrooms, kitchens and floors.

---

6. Tadelakt

• Description: Traditional Moroccan lime plaster, water-repellent and glossy.
• Price indication: € 165 – € 275 per m²
• Characteristic: Exclusive and luxurious; especially for bathrooms and wellness areas.

---

7. Exterior Alternative: Limewash

• Description: Thin lime plaster for exterior facades with a rustic effect.
• Price indication: € 49 – € 66 per m²
• Characteristic: Authentic appearance, protects the facade.

---

Conclusion

There are several alternatives to stucco, ranging from affordable options such as spray plaster to luxury finishes such as béton ciré and tadelakt.
Via jeofferte.nl you can easily compare different finishes and prices to determine which solution best suits the space and budget.