What are the expected costs for plastering?

The price for stucco depends on the type of finish, the condition of the surface and the scope of the assignment. Below are the average target prices per m², including material and labor, excluding VAT.

Interior stucco

• Paint-ready stucco: € 15 – € 25 per m²
  (Tight and smooth, ready to paint)
• Ceiling paint-ready: € 18 – € 30 per m²
• Spack spraying: € 7 – € 12 per m²
  (Fast, with a light granular structure)

Luxury / decorative finishes

• Concrete ciré or microcement: € 110 – € 165 per m²
• Clay plaster: € 40 – € 60 per m²
• Tadelakt: € 150 – € 250 per m²

Exterior stucco

• Decorative plaster or crepi: € 50 – € 75 per m²
• Whitewashing: € 45 – € 60 per m²
• Exterior stucco with insulation: € 90 – € 140 per m²

Texture and decorative plasters

• Granol inside: € 12 – € 20 per m²
• Granol outside: € 45 – € 65 per m²
• Spachtelputz: € 15 – € 25 per m²

Starting rate for small jobs

For small surfaces (under 30 m²), many plasterers charge a starting rate of € 290 – € 420 in addition to the price per m².

VAT rate

• 9% VAT: for homes older than 2 years (labor and material via professional).
• 21% VAT: for new construction or self-purchased materials.

Key Price Factors

1. Surface area (more m² is relatively cheaper).
2. Condition of the substrate and required preparation.
3. Type of finish and choice of materials.
4. Accessibility and complexity of the space.
5. Quality and experience of the professional.

Conclusion

In 2025, the costs for standard interior plasterwork will average between € 15 and € 30 per m², while decorative finishes and exterior plasterwork are considerably more expensive.
By comparing multiple quotes, for example via jeofferte.nl, a clear picture of price and quality can be obtained.

1. Interior plasterwork

• Paint-ready plastering: € 15 – € 25 per m²
  Smooth, even finish, ready for painting.
• Paint-ready ceiling: € 18 – € 30 per m²
  Smooth ceiling, ready for painting.
• Spack spraying: € 7 – € 12 per m²
  Cheap, fast finish with a light granular structure.

2. Luxury and decorative finishes

• Beton ciré / microcement: € 110 – € 165 per m²
  Seamless, waterproof, widely used in bathrooms and kitchens.
• Clay plaster: € 40 – € 60 per m²
  Natural and moisture-regulating finish for interiors.
• Tadelakt: € 150 – € 250 per m²
  Luxurious, artisanal finish, water-repellent.

3. Exterior plastering

• Decorative plaster / crepi: € 50 – € 75 per m²
  Protective and aesthetic finishing of the facade.
• Whitewashing: € 45 – € 60 per m²
  Thin lime plaster for a characteristic look.
• Exterior plastering with insulation: € 90 – € 140 per m²
  Facade insulation and finishing in one package.

4. Texture- and decorative plasters

• Granol inside: € 12 – € 20 per m²
  Texture plaster with coarse grain, decorative for indoor use.
• Granol outside: € 45 – € 65 per m²
  Texture plaster for exterior walls.
• Spachtelputz: € 15 – € 25 per m²
  Fine, hard decorative plaster for interior walls.

Starting rates for small jobs

For jobs smaller than approximately 30 m², many plasterers charge a starting rate of € 290 – € 420 in addition to the m² price.

VAT rate

• 9% VAT: for homes older than 2 years (labor and material via the professional).
• 21% VAT: for new construction or self-purchased materials.

Conclusion

The costs per type of stucco vary from € 7 per m² for simple spray stucco to more than € 150 per m² for luxury tadelakt.
By comparing multiple quotes, for example via jeofferte.nl, it becomes clear which finish best suits the desired result and budget.

The costs for stucco work depend on several factors. By taking these points into account in advance, a realistic estimate can be made and surprises can be avoided afterwards.

1. Surface area

• More m² = lower price per m².
• A start-up rate is often charged for small jobs (under 30 m²).

2. Condition of the surface

• Unevenness, cracks or old finishes must first be removed or repaired.
• Leveling, priming and repair work incur extra costs.

3. Type of stucco

• Simple finishes such as paint-ready plastering or spackling are relatively inexpensive.
• Decorative finishes such as béton ciré, clay plaster or tadelakt are more labor-intensive and expensive.

4. Location: inside or outside

• Exterior stucco requires extra weather-resistant materials and is therefore more expensive than interior stucco.
• Interior stucco is more stable in execution and therefore cheaper.

5. Complexity of the space

• Many corners, niches, ornaments or round shapes make the work more labor-intensive.
• Straight, easily accessible walls and ceilings are faster and cheaper.

6. Accessibility

• Difficult to reach spaces or high facades may require extra time and possibly scaffolding rental.

7. Quality and experience of the professional

• An experienced plasterer works faster and delivers a better end result.
• Higher quality and longer warranty often come with a higher rate. When requesting quotes via jeofferte.nl, this is often clearly comparable.

8. Region and planning

• Rates are often slightly higher in urban areas.
• Work outside the peak season can sometimes be cheaper.

9. VAT rate

• 9% VAT for homes older than 2 years (labor and materials via a professional).
• 21% VAT for new construction or if materials are purchased yourself.

Conclusion

The price of stucco depends on surface area, type of stucco, condition of the substrate, accessibility and craftsmanship. By comparing quotes via, for example, jeofferte.nl, you get a good picture of the costs and quality of the various providers.

When having plastering work done, two VAT rates apply in the Netherlands. Which rate applies depends on the type of building and the age of the house.

9% VAT (reduced rate)

The reduced rate of 9% applies to:

• Labor and materials supplied by the tradesperson for homes older than 2 years.
• The residential part of a property used as a dwelling.
• Preparatory work that is an integral part of the plastering, such as primer, leveling, and materials.

21% VAT (standard rate)

The standard rate of 21% applies to:

• New-build homes and properties less than 2 years old.
• Commercial properties, offices, shops, and holiday homes.
• Loose materials that you purchase yourself and are not processed by the tradesperson.
• Work that is not directly related to plastering, such as tiling or installing sanitary ware.

Mixed use (residential and commercial)

For properties that are partly residential and partly commercial:

• 9% VAT applies only to the residential part.
• 21% VAT for the commercial part.

Example

• House older than 2 years, 50 m² to be plastered ready for painting
  Price excluding VAT: € 1,000
  VAT 9%: € 90
  Total: € 1,090
• New build house, 50 m² to be plastered ready for painting
  Price excluding VAT: € 1,000
  VAT 21%: € 210
  Total: € 1,210

Conclusion

• 9% VAT on existing homes older than 2 years (labor + materials via a craftsman).
• 21% VAT on new construction, commercial properties, and self- purchased materials.

Platforms like jeofferte.nl ensure that these VAT rules are clearly applied in the quote.

1. Interior walls – paintable plastering

• Surface area: 50 m²
• Price per m²: € 15 – € 25
• Total: circa € 750 – € 1.250
• Feature: Tight, smooth finish ready to paint.

2. Ceiling plastering – ready for painting

• Surface area: 30 m²
• Price per m²: € 18 – € 30
• Total: circa € 540 – € 900
• Feature: Smooth ceiling, ready to paint.

3. Spack spray plaster

• Surface area: 50 m²
• Price per m²: € 7 – € 12
• Total: circa € 350 – € 600
• Characteristic: Fast, affordable finish with light structure.

4. Bathroom plastering (concrete ciré or microcement)

• Surface area: 10 m²
• Price per m²: € 110 – € 165
• Total: circa € 1.100 – € 1.650
• Characteristic: Waterproof and seamless finish.

5. Exterior wall plastering – decorative plaster

• Surface area: 50 m²
• Price per m²: € 50 – € 75
• Total: approximately € 2,500 – € 3,750
• Characteristic: Protective and decorative finish for the facade.

6. Clay plaster – interior

• Surface area: 40 m²
• Price per m²: € 40 – € 60
• Total: approximately € 1,600 – € 2,400
• Characteristic: Natural and moisture-regulating finish.

VAT rate

• 9% VAT: for homes older than 2 years (labor and material via the professional).
• 21% VAT: for new construction or self-purchased materials.

Advice

• These amounts are indicative.
• The final price depends on factors such as surface area, preparation, accessibility and type of finish.
• By comparing quotes, for example via jeofferte.nl, you get a more accurate overview of costs.